End Cap/ Closing inlet-outlet cap
Closing cap - Fits all channels. Manufactured from gray ABS to complement edge rail. Guides aid cutting to correct height. 4" bell end connection(K100), 4" and 6" bell end connection (K200), 6" and 8" bell end connection (K300) to Schedule 40 pipe. Seal using PVC-ABS cement.
K100 -4" Sch 40
Part Number - 96822
K200 - 4" + 6" Sch 40
Part Number - 96821
K300 - 6" + 8" Sch 40
Part Number - 96826
Schedule 40 6" inlet/outlet caps - K100 and KS100 only
Polymer concrete end cap complete with a galvanized or stainless steel edge rail. A 6" Sch 40 connector is cast into the polymer concrete end cap. Inlet caps connect to female end of channel, outlet caps connect to male end of channel.
K100 - 6" Sch 40 Inlet cap
K100 -6" Sch 40 Outlet cap
K1-304-6 6" Inlet cap Part Number - 96839
K1-404-6 6" Inlet cap Part Number - 96834
K1-308-6 6" Outlet cap Part Number - 96840
K1-408-6 6" Outlet cap Part Number - 96836
Installation device & Template
Installation devices are used to align channels to create a complete trench run. Once the installation is complete using these devices the concrete is poured around the device and channels. Installation devices allow a single concrete pour.
For 4" wide channels
For 8" wide channels
For 12" wide channels
Part Number - 97477
Part Number - 97478
Part Number - 97479
Template for 8" wide installation device - print version
8" wide - 1 meter unit template
Oval to Schedule 40 6" pipe connector - 100 run channels only
Oval to round polypropylene adapter for bottom drill-out on 4” polymer concrete channels. Schedule 40 6” plain end can be solvent welded to underground pipe system. Seal to channel using appropriate flexible sealant.
1. Oval to fit drill out to channel
2. Schedule 40 6" plain pipe
Part Number - 95140
Vertical outlet strainer - 4" bottom outlet only
Strainer for 4” vertical outlets, prevents large particles of debris flowing into underground pipe system and causing blockages.
1. Flexible prongs fit inside Schedule 40 4" pipe
2. Lip on both sides hangs strainer from base of channel
Part Number - 93488
Foul Air Trap (FAT) - 4" pipe size only
A polypropylene foul air trap (FAT) that fits into front or side of in-line catch basins.The FAT is connected to the MDPE catch basins bottoms by means of Sch 40 female to female PVC couplings available from any plumbing retailer. Catch basin base, coupler and FAT are glued together.
1. 2" removable rubber plug for rodding access
2. Schedule 40 4" plain end pipe
3. Schedule 40 4" pipe
Inside catch basin - removable black rubber trap plug at top, 4" pipe outlet at bottom
Part Number - 90854
Klassik Drain Accessories
A complete trench drain solution requires more than just channels and grates. Correct solution of outlets to plumbing pipework (outlets through catch basins or direct pipe connection) plus closing caps at starts and ends of trench and other items such as pipe outlet connections, installation devices, strainers and foul air traps are all part of a complete system. Read technical details in our Drain Catalog.
View Case Studies
on KlassikDrain Accessories