Heavy duty sloped trench drain system available in 4” (100 mm)-S100K, 8” (200 mm) - S200K and 12” (300 mm) - S300K internal width for applications requiring the most rugged product. All systems have 130 ft (40 m) continuous slope. Read technical details in our Drain Catalog.
Three choices of grates
slotted or longitudinal (ADA) grate rated to Load Class F. Slotted 4-bolt grate also available.
are included on every 5th channel unit to allow vertical evacuation of the system along the run.
recesses in grate fit around lugs on the edge rail to prevent longitudinal movement.
patented, boltless locking system provides quick fitting and removal of grates. Helps reduce installation/maintenance time and cost.
Channel identification & system numbering -
in addition to channel numbering on sidewalls and base of channel, each end of the channel indicates the number of the channel that will connect to it.
Sloped (0.5%) channel units
meter long units provide 131'-3” (40 meter) continuous slope. This equates to 1/17" fall per linear foot.
a durable yet lightweight material made from polyester resin binder reinforced by mineral aggregates and fillers
Ductile iron edge rail-
integrally cast-in rail provides maximum strength and protection for channel body. Shock absorbing widgets, with M10 stainless steel threads, are fitted in rail to assist with grate fit and aid hanging installation.
Interconnecting end profiles
allow easy and effective joining of channels
View Case Studies
Click the red dots to see the product features.
Steel edge, modular trench system in 4'', 8'' & 12'' internal width.
Heavy duty iron edged, modular trench system in 4'', 8'' & 12'' internal width.
Restricted depth systems.
Specialty commercial problem solving products. The products below can be used in a variety of applications with special installation or drainage requirements.
View Drain Case Studies
Click bars to see the products / applications.